(USED) Samson XPD2 Headset USB Digital Wireless System
|
|
|
|
|
Samson XPD2 Headset USB Digital Wireless System – Used
2.4GHz digital wireless headset system with RXD2 USB stick receiver, PXD1 beltpack transmitter, and DE5 micro headset microphone — 100-foot operating range, 20-hour battery life, plug-and-play USB connection.
About This System
The Samson XPD2 Headset is a purpose-built 2.4GHz digital wireless system that strips out all the complexity that usually comes with wireless audio. There is no frequency coordination, no squelch adjustment, and no RF environment to manage — the RXD2 USB stick receiver plugs directly into any Mac, Windows, or Chromebook computer and the system pairs with a single touch. The result is a complete wireless headset solution that takes under a minute to set up and delivers uncompressed digital audio with a signal-to-noise ratio above 85dB. The DE5 micro headset microphone is low-profile and lightweight, designed to stay out of the frame for video and out of the way for live performance. Two AA batteries in the PXD1 beltpack transmitter run for 20 hours, and a 100-foot operating range gives presenters, performers, fitness instructors, and content creators real freedom of movement. The 3.5mm analog output on the receiver also opens the door to cameras, mixers, and mobile devices beyond just computers.
Key Highlights
- 2.4GHz digital wireless transmission — uncompressed audio with no analog signal degradation
- RXD2 USB stick receiver plugs directly into Mac, Windows, or Chromebook — no driver installation required
- 1-touch pairing — receiver and transmitter link automatically without manual frequency matching
- 100-foot operating range (line of sight, environment dependent)
- PXD1 beltpack transmitter with adjustable volume control
- DE5 micro headset microphone included — low-profile design for video, performance, and presentation
- 20-hour battery life on two AA batteries in the transmitter
- 3.5mm analog output on receiver for use with cameras, mixers, or mobile devices
- USB-A to USB-C adapter included for compatibility with newer devices
- Compatible with iOS via Apple Lightning to USB Camera Adapter and Android via OTG adapter
- Compatible with Samson Expedition Series portable PA systems with USB wireless port
- Up to 2 systems can operate simultaneously
- Signal-to-noise ratio greater than 85dB
Truly Plug and Play
The XPD2 was designed for people who need wireless audio to work immediately and reliably, without a learning curve. Plug the USB receiver into your computer, power on the transmitter, press the pair button once, and you are live. There are no frequencies to manage, no squelch to set, and no RF scanner to run before a gig or a session.
Digital Transmission Advantage
Because the XPD2 transmits digitally rather than through analog FM, the audio signal arrives at the receiver uncompressed. That means you get clean, full-range audio from 20Hz to 16kHz with a THD below 0.1% — performance that holds up against a wired connection rather than simply being "good enough for wireless."
Versatile Connection Options
The USB receiver works as a standard audio interface for any computer or compatible device, and the 3.5mm analog output on the receiver means you can also route audio into a camera, mixer, or any device with an analog input. One system covers a wide range of use cases without any adapters beyond what is already in the box.
Great Fit For
- Presenters, educators, and public speakers who need hands-free wireless audio with simple setup
- Fitness instructors and aerobics teachers who need a reliable headset mic with room to move
- Content creators, podcasters, and streamers routing audio directly to a computer without an audio interface
- Live performers using a Samson Expedition PA system with USB wireless capability
- Video producers who need a compact wireless headset signal routed into a camera or mixer via 3.5mm
- Anyone upgrading from a wired headset mic who wants an affordable, no-fuss wireless solution
What's Included
- RXD2 USB stick receiver
- PXD1 beltpack transmitter
- DE5 micro headset microphone
- USB extension cable
- USB-A to USB-C adapter
- Batteries not included — requires 2x AA (LR6) alkaline batteries in the transmitter
Specifications
System
RXD2 USB Receiver
PXD1 Beltpack Transmitter
Wireless headset systems have a way of solving problems that wired setups simply cannot — and the XPD2 does it without demanding anything complicated from the person using it. If you have been running a cable across the stage or anchoring yourself to a desk mic during a presentation, this is an easy way to change that. Picking it up used makes the math even easier.
Any questions about condition, what's included, or how this would work in your specific setup — we are genuinely happy to talk through it. Reach out before you buy if anything is unclear.
Call or text us at 814-371-5666 — Spotts Music Center, Dubois, PA. Helping you make music.